4 Leg Chain Slings Configurations

When it comes to choosing your 4 leg chain sling configuration there are a number of options to think about.

Firstly decide on the maximum safe working load you need and check the chain diameter will suit your operation. Secondly decide on the maximum chain length you are likely to need. Don’t worry if you may sometimes need a shorter length, because you can add on some shortening grabs. These specialist chain grabs enable you to shorten each chain leg in a safe and secure manner. They are very beneficial for loads where one or more chain legs need to be a different length from the others.

PLEASE NOTE; If you intend to temporarily shorten your chain a shortening grab is the ONLY safe method.

At the end of each leg you will need a fitting in order to connect your load.

Choices for online purchase are;

sling hooks with safety catches or self locking hooks.

These are the most commonly used end fittings, however if you would like something else like a ‘C’ hook or swivel hooks then please get in touch, we can supply these to order too.

Hitches and Safety Precautions

Even four leg chain slings can be used in different types of hitches but please be aware that some will incur safe working load reductions, as will using in extreme temperatures so always consult the manufacturers specifications prior to use.

Due to the fact that chain can be damaged during use regular checks should be carried out. It only takes one bad link for the whole sling to fail! If any link is found to be distorted, cut, have gouge marks, is bent or anything else the sling could fail so do not use until thoroughly tested by a competent person. A thorough yearly inspection is essential.